General Engineering and Machine Tool

 We can manufacture/recondition/repair any mechanical part as per drawing/sample, examples below

Parallel Master Mandrel and Master Cylinder (up to 1200mm long)

Parallel Master Mandrel / Master Cylinder (up to 1200 mm long)

  • Made from case hardened steel.
  • CNC turned, hardened and all over ground.
  • Overall accuracy is up to 0.002 mm.

Taper Master Mandrel (ISO & BT 30/40/50/60 and MT 1/2/3/4/5/6)

  • Made from case hardened steel.
  • CNC turned, hardened and all over ground.
  • Overall accuracy is up to 0.002 mm.

Universal comparator pin & shaft

  • Made from case hardened steel or En 24 steel.
  • CNC turned, hardened and all over ground.
  • Overall accuracy is up to 0.002 mm.

Universal Dead Center, Bench Center, Pipe Center and Stub Center

  • Made from tool steel, case hardened steel or carbide.
  • CNC turned, hardened and all over ground.
  • Overall accuracy is up to 0.002 mm.

Dies, Punch holders and Punch Axis

  • Made from HSS M2 and HCHCR D2.
  • CNC turned, vacuum hardened and all over ground.
  • Overall accuracy is up to 0.005 mm.

Plastic Industry Dies and Punches

  • Made from En41B toughened and gas nitrided.
  • CNC turned, hardened and all over ground.
  • Overall accuracy is up to 0.005 mm.
Circular Form Tool

Various Types of Form Tools (Flat Form Tools & Circular form Tools)

  • Made from HSS M2 and HCHCr D2.
  • CNC turned, hardened and all over ground.
  • Overall accuracy is up to 0.005 mm.

Spindle Shafts

  • Made from material specified by customer.
  • CNC turned, hardened and all over ground.
  • Balanced as per international standards.
  • Overall accuracy is up to 0.001 mm.

Valve Plunger

  • Made from rubber, brass and stainless steel.
  • All three materials are ground in assembled condition.
  • CNC Turned and all over ground.
  • Corner radius is ground on optical profile grinding machine.
  • Overall accuracy is up to 0.005 mm.

Gauges

  • Made from material specified by customer.
  • CNC turned, hardened and all over ground.
  • Overall accuracy is up to 0.001 mm.

Allcarb Tools and Parts

875/4 GIDC Makarpura,
Opposite Modern Foods Factory, Vadodara, Gujarat, India-390010

Reach Us:

Get In Touch:

15 + 4 =

© 2020 Allcarb Tools & Parts. Developed by Aktion Branding